Tongue and Groove Light Weight and Earthquake Resistance Flooring
Board Compressed Fiber Cement Board
1.Durable and strong and easy of use and Superior flatnes
2.Low moisture movement, immune to permanent water damage
3.Anti-high temperature and anti-crack
4.Non combustible, no toxic gasses,
5.Resistant to many chemicals and Resistant to fungus, bacteria,
insects, vermin, etc.
6.Can be covered with floor coating, floor rubber or wood floor
Fiber Cement Board is a stable performance and light weight
building &decoration board used cement as major and natural fiber reinforced, with the process of pulping,
emulsion, forming, pressing, autoclaving, drying and surfacetreatment.With the sanding surface, thickness uniformity is better
and grain is clearer. And because of the cement,the strength is higher, and waterproof performance is much better.
Fiber Cement Board Flooring Panel
Water absorption (%)
Wet expansion (%)
No delamination and crack after 25cycles under freezing and thawing
No water drop on the board surface after 24hours
1. Strong wooden pallet(Standard Export Package)
2. Corner protective
3. Plastic Film
4. Protect Board
It can be used for interlayer floor .It is an inorganic material
with light weight, high density, high strength, high flatness,
non-combustibility and non-radioactivity. It can be used for the
interlayer floor of adding layer building, such as office and
commercial residential building.
1. 100% Asbestos Free
2. Excellent Fire Resistant
3. Excellent Moisture / Water Resistant
4. Good Heat and Sound Insulation
5. High Strength
6. Stable Dimensions
7. Durability and long service life
(1). Thickness: 18-24mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available
1. We draw the installation guideline to define the fixing
position, the center distance is 1200mm.
2. USe UC type keel hang fitting to link and fix the room and key
keel, keep the key keel horizontal.
3. Use the caliper to vertically fix the sub keel on key keel,the
center distance of the sub keels is 611mm.
4. TO install the horizontal keels as per the request,is center
distance is 1222mm.
5. Use the tapping screw fix the woersen board on the sub-keel and
do the treatment of the seam connection.